Remnant Typesetting
Based on the self-developed visual recognition algorithm, one-click photo snap on the cell phone to identify the remaining plates.Convenient for users to recycle and utilize the remaining irregular sheetsGive higher value to each piece of leftover material.
“Bodor lightning” perforation technology
“Bodor lightning” drilling, which greatly shortens the drilling time and improves processing efficiency. Continuous drilling has high stability, and the hole reject rate is reduced from about 10% to about 3‰, which improves the integrity of the work.
High precision, small thermal variabes, stable follow-up, stable starting point, to ensure the best cutting section. Reduce drilling time, save gas, reduce energy consumption, reduce the risk of damage to lasers and cutting heads, and improve material utilization;
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | A3 (standard) |
| Sheet Working Area | 3048mm × 1524mm |
| Laser Power | 3000W |
| Max Linkage Speed | 100 m/min |
| Max Acceleration | 1.5G |
| Positioning Accuracy | ±0.05mm/m |
| Repositioning Accuracy | ±0.03mm |
| Bed Type | Mortise-and-tenon welded segmented |
| Control System | Bodor Thinker (EtherCAT 1 ms) |
| Laser Head | Bodor Genius IP65 (auto-focus) |
| Laser Source | Bodor Power (>40% efficiency) |
| Power Supply | 380V/50Hz (customizable) |
Cutting Capacity (Approximate Max Thickness)
| Material | Max Thickness (mm) | Gas Recommendation |
|---|---|---|
| Carbon Steel | 20–25 | O₂ |
| Stainless Steel | 10–12 | N₂ / Air |
| Aluminum | 8–10 | N₂ / Air |
| Brass | 6 | N₂ / Air |
Cutting Speed Comparison Table (Approximate m/min for 3000W)
| Thickness (mm) | Carbon Steel (O₂) | Stainless Steel (N₂/Air) | Aluminum (N₂/Air) | Brass (N₂/Air) |
|---|---|---|---|---|
| 1 | 45–70 | 38–60 | 35–50 | 35–50 |
| 3 | 20–25 | 22–38 | 15–25 | 15–25 |
| 5 | 10–20 | 8–12 | 8–12 | 8–12 |
| 10 | 5–7 | 2–3.5 | 2–3.5 | 2–3.5 |
| 12 | 3–5 | — | — | — |
| 16 | 2–3 | — | — | — |
| 20 | 1.5–2.5 | — | — | — |
Sheet Edge Anti-vibrating
Employs powerful algorithms to adapt to high-frequency vibrations in thin plates caused by air pressure, intelligently adjusting laser head sensitivity for consistently stable cutting and maintained quality/efficiency.
Remnants Layout
Allows taking a photo of remnants with a phone and uploading it; the system automatically identifies corners and enables one-click layout, turning waste into valuable resources.
Laser Head Intelligent Collision Avoidance
Incorporates self-developed servo-following sensors and algorithms for 360° real-time obstacle detection in the operating path, planning avoidance routes to minimize collision risks.
2-Year Warranty for Core Component
Covers self-developed BodorThinker control system, BodorPower laser source, and BodorGenius laser head with integrated design for stability, reduced contamination, lower failure rates, extended lifespan, and decreased maintenance costs.
- Single-Platform Design – Simple, stable flatbed for easy loading/unloading and reliable daily operation.
- Cutting Parameter AutoMatch – Visual sample comparison auto-optimizes parameters for better quality and less labor.
- Comprehensive Performance – 1.5G max acceleration with high-performance servo motors; 30% efficiency gain over previous generation.
- Bodor Genius Laser Head – IP65 protection, wider focus range, faster cutting, and excellent performance on reflective materials.
- Bodor Power Laser Source – >40% photoelectric conversion efficiency, stable monitored output, long-term low power loss.
- Bodor Thinker Control – 1ms EtherCAT response, closed-loop functions, rich nesting, user-friendly interface.
- Remnants Layout – Phone photo upload → auto corner detection → one-click nesting of waste sheets.
- Intelligent Collision Avoidance – 360° real-time sensing and path planning to prevent head damage.
- 2-Year Warranty – On BodorThinker, BodorPower, and BodorGenius for integrated stability and low costs.
Oxygen (O₂) — Faster Cutting for Carbon Steel
2–3× faster cutting with extra heat generation
Ideal for thick carbon steel
Causes oxidation on edges (may need post-processing)
Low cost, higher finishing work
Nitrogen (N₂) — Premium Clean Cutting
Oxidation-free, clean and shiny edges
Best for stainless steel, aluminum, and brass
Slower cutting but superior finish quality
Higher cost, reduces rework and labor
Air — Cost-Effective General Cutting
Balanced speed and quality performance
Suitable for mild steel and non-critical applications
Slight oxidation possible
Lowest operating cost, reduced production expenses
Mineral casting anti-burning
Easy to clean slag: automatic seperation of metal residue and anti-burning plate, reducing maintenance cost.
Stability: longer service life and less deformation compared to anti-burnout cast iron and anti-burnout steel plates.
Hanli Chiller Details (3000W configuration)
- Model: HL-3000 dual-temperature series
- Cooling Capacity: ~9600W
- Precision: ±1°C (laser 25–30°C, optics 15–20°C)
- Tank: 38L stainless steel
- Protection: Over-current, flow alarm, over-temperature
- Power: 3-phase 380V, low noise ~75dB(A)
- Coolant: R32; uses purified/deionized water
Three-Phase High-Precision Automatic AC Voltage Regulator
- Model: SVC-60KVA
- Input Voltage: 260–450VAC
- Output: 380VAC ±3%
- Current: 60A
- Size: 415×515×870mm
- Protection: IP20, 2000V/min electrical strength
Compressor Details (for Air Cutting)
- Screw Air Compressor: 15 kW / 20 Hp, 16 Bar, 1.2–1.5 m³/min, air-cooled, frequency conversion start, 380V/50Hz
- Freeze Dryer: 2.1 m³/min, 2–10°C dew point, 16 Bar, ambient <45°C
- Fine Filter × 3: 3.0 m³/min, 0.01 µm accuracy, ≤2.0 MPa, RP3/4 interface
- Tank × 1: 340 L, 16 Bar max, RP3/4 inlet/outlet, size Φ500×1760 mm
Bodor Sri Lanka Support
We have the biggest genuine Bodor spare parts inventory in Sri Lanka, Bodor-trained engineers for exclusive on-site support, and dedicated online support for fast issue resolution and minimal downtime.
